The fabric I purchased was duck-cloth and remnants. Puese wanted something super durable, and I agreed. Duck-cloth was also on super sale, had bright solid colors and was fun. We picked fabric remnants to match durability, followed by style. Puese's style is inspired by Zelda... Actually Link from Zelda. (I have not made his yet, but I'll post it when I do.)
Before I started I put music on to help me focus... This meant my laptop was hooked up to the good speakers in the other room, so I took notes. Then I ironed out the fabric so that it was flat, for best results.
To save fabric, I like to create my fold with enough space on the top to facilitate whatever it is I'm making, and no more. This eliminates lots of smaller pieces of extra fabric that cannot be used for anything else. Instead I have large amounts of awkward cut fabric that could possibly become something else. Measure from the fold 6.5 in out, squared from the fold. I cut mine out when I cut everything, the tutorial said to cut it first. Then mark 1 in down square from that mark, and mark A.
It is at this point that I will, from now on, if I ever make myself another apron, make the measurement shorter than 17 in. Later on, I'll shorten it from the top by 3.5 in.
20 in down from both B and C are points D and E, respectively. Because everything is square, D and E are also 13 in apart. Mark The top at 6.5 down to A, to C, to E, to D. This is the shape of the apron. After it's marked, cut it out.
After it's cut, open it up and iron it out so there's no fold marks. I kept the iron close because the fabric held the wrinkles and creases too well.
Fold each of the sides in 1/2 in and press. When I say the sides, I mean the 20 in perpendicular sides.
Fold these folded sides over 1/2 in again. So the raw edges do not show, and press. With such a thick cloth, I was able to use the previous fold to guide the second one. The raw edge of the first one jutted up against the fabric tautly to make the second fold. Of course, I also measured to ensure it was even. (And get used to this double folding thing).
Stitch each hem flat then do the same to the top. I opted for a zigzag to keep everything flat, but that was mostly for decorative purposes.
Tadah! Now do the same thing to the bottom. In hindsight, I might have treated this bottom side scenario more like the pocket, but it works, and I actually have a problem with it. But if you can, go ahead and tuck these corners as well.
Stay-stitch the diagonal edges. More Zig Zags!!! I did a narrower zigzag here. I also did it at a 1/4 in so that the next step was a little bit easier for me. But do whatever you're comfortable with.
Fold and press the diagonal edges in by 1/4 in. (That means I did it down the middle-ish of my zigzag.)
Fold what you just folded and pressed, over again, this time by 1 in. Then go ahead and press that too. This will make the track for the ties to go through.
Take your twill tape, or cotton webbing, or whatever it is that you have for the tie and fold it over 1/2 in twice. Just like everything else we've been folding over twice, and stitch it down. Yay! No raw edges.
Since I'm not a person who owns anything knitting or crochet related, I could not use any sort of knitting or crochet implement to feed the ties through the tracks we just made, so I opted for a colored pencil. Get the tip of it under the hem of the edge, it should be durable enough to hold. Then push/feed the tie through the opening we made. Be sure that when you do this, the tie isn't twisted all wonky around the neck part.
It is at this point that I tried on the apron (sans-pocket) to see if it worked. It did not. It was far too long, and the tie fell too low for my comfort. So I had to come up with a plan to make it shorter without having to undo all the work I just did.
Take it from the top. This meant that the top of the apron was now going to be much wider than it should be, but after working with it a bit, I decided it wouldn't be too too wide, that I couldn't wear it. Also; I didn't want to do more work than I had to.
You can see from the picture where I marked it. It was 3.5 in below the top hem, so I marked 2.5 in below it to account for all the hemming I'd have to redo. Don't forget to take out the tie if you need to readjust.
After cutting the top where it was marked, I opened up the side seams a bit so that I could re-hem and fold everything appropriately.
Make sure to open it up all the way, refold the top hem twice like before, stitch it across, then refold the side diagonal seam and restitch that as well. When I have to restitch, I try to match the zigzags as close as possible and then make it as small of a space of overlapping stitching as possible, then I pull all the threads to the wrong side and tie them off. This makes it look at lease a bit clean.
Re-feed the tie through the appropriate holes. Then try it on again. My fancy blue #2 thought it looked rather nice with my cowboy hat for modeling. Now that I was satisfied with the length, it was time to add the pocket.
This is not duck-cloth. It's thick and durable, but not as much so. It's also 17 in by 10 in.
This time, we'll start with the top of the piece. Fold over and press the top of the pocket 1/2 in.
By the way; We'll be doing all of the remaining folding and pressing and stitching towards the wrong side of the fabric. Or the back. In my case; the dull side.
I'm sure you know the drill by now. Fold over the top of the pocket 1/2 in once again... fold the fold you already folded so there's a second fold. Then stitch. I'm sticking with zigzags for this one.
Zig Zag or stay stitch the remaining three sides of the pocket. Again; I did this at 1/4 in, it didn't come in as handy this time, but it was clean, none-the less.
Fold and Press the left and right sides in by 1/2 in. Then fold and press the bottom up by 1/2 in. We will not be performing a second fold on these folds... These are remaining single folds.
Before we do any stitching, we're going to tuck the corners. I didn't get what she did in the other tutorial so I'll tell you what I did. Unfold both the side and bottom, and where they intersect, I folded the corner in at an angle. Then I refolded the side and bottom in. Kind of like folding a paper airplane.
Center the pocket on the apron. The tutorial says to do it 2 1/2 in from the corners and then 4 something from the sides. I got it there and then decided I needed to make it straight/even/parallel with the bottom so I did it 7.5 in from the bottom and regrettably had to use pins. I also made sure it was centered side to side as well. Then I sewed it on. to keep with continuity, I did a zigzag instead of and "edge stitch." Only stitch the bottom, left and right sides to the apron. Do NOT stitch the top shut.
For the separation of pockets, measure and mark 3.5 in. in from one side. Then 3.5 in. in from that point. Make sure these marks are straight, even, and perpendicular to the top and bottom. Then stitch them down. I recommend stitching them from the bottom of the pocket up so that if there's any give in the fabric, it won't bunch up at the bottom of the pocket. I'm not sure I like these pockets. But then again, I don't usually use pockets on an apron in the first place. I'll see.
Ta-Dah! There we have it; an apron. I have already used it a few times... probably should have used it this morning too... I still have batter on my t-shirt, which I completely forgot about until just now. It's come in very handy. I am also thinking about adding more to this apron... but that's a post for another day. A day after I've actually added to it. Maybe after I make Puese's Legend of Zelda inspired apron.
No comments:
Post a Comment